This Gemtor NYC Personal Harness is extremely lightweight, weighing in at only 2.8 lbs! The unique design lowers the body's center of gravity and helps reduce the possibility of toppling. Available with right or left side style opening.

Now Available with left or right side opening for wearing over or under bunker pants.

Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. 2 inch waist belt webbing for increased comfort during long rappels. Waist closure uses double-pass buckle system for added security. Removable 5 inch waist pad with forged D-ring used for main attachment point.

Comfortable 5 inch wide laminated foam
waist pad easily slides on to fit most
unpadded Yates rescue and tactical harnesses.

The Yates waist pad features a 5 inch wide laminated foam waist pad with rear D ring for use in work positioning and tactical situations.

Specially designed for tactical applications. Can be worn as a belt and turned into a rappel seat by removing the leg portions of the harness from waist pocket.

Designed for fire department, rescue, military, industrial and commercial applications where a rear fall arrest D attachment point is not required. Seat portion is easily donned and adjusted by use of camlock buckles. Pads not included.

First fire resistant harness built to NFPA Class II harness standards. Utilizes quick connect D-ring and snap hook buckles on legs to aid in donning. Leg buckles can be quickly packed away in waist pockets (made of black Fire Retardant Nomex material) when harness is worn as a Ladder Belt. Pad under waist buckle for added comfort.

First fire resistant harness built to NFPA Class II harness standards. Utilizes quick connect D-ring and snap hook buckles on legs to aid in donning. Leg buckles can be quickly packed away in waist pockets (made of black Fire Retardant Nomex material) when harness is worn as a Ladder Belt. Pad under waist buckle for added comfort. Nylon is flame-retardant.

Designed to be donned with turnout pants. Utilizes quick connect waist buckle. Harness can be easily fitted to turnout pants using the existing keeper loops supplied on many turnouts. If turnouts do not have keeper belt and leg loop straps, they must be added by the user to secure the harness. Available with Left or Right Opening.

Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. Similar to the standard Assault Harness with quick adjust waist buckle system for easier entry. D ring used for main attachment point.

Designed for fire department, rescue, military, industrial and commercial applications where a Class II seat harness is required. Quickly and easily donned and adjusted by use of camlock buckles.

Patient packaging and extrication system combined the backboard immobilization of a short board with the suspension and support of a full body harness. Extremely useful for any confined space operation where a vertical environment is encountered. Meets ANSI/OSHA Class III harness standards.

Designed to be used for vertical lifting and lowering with the Yates Heavy Rescue Harness or any Class III harness with appropriate shoulder D rings. Spreader bar is made with 1/2 inch round Delrin rod.

Specially designed for rapid rappel and extraction operations. Mil spec load bearing vest shoulder straps are sewn into the harness allowing the harness to be worn under any military load bearing vest by replacing the existing harness straps with the Stabo straps and connecting the Alice clips of the vest to the waist of the harness.

Designed in conjuction with LAPD SWAT, this new harness utilizes a fully padded structural duty belt which is designed to replace the exisiting belt worn by SWAT Officers. Features quick leg adjustment with camlock buckles and fully structural rear attachment loop. Available in 3 Sizes!

Designed in conjunction with military Special Ops units this harness is worn as a duty belt on users BDU’s.