 |
|
Nomex Hood Specs
PBI
Black Deluxe Hoods
Product Specifications |
Material
Specs |
Hood Specs |
| Content: |
Outer
Layer: 40% PBI
60% Kevlar
Inner Layer: 20% PBI
80% Lenzing FR |
| Construction: |
1 x 1
Circular Knit |
| Weight: |
Approx.
8.2 oz. / sq. yd. |
| TPP
(Thermal Protective Performance): |
35.7
|
| TPP
NFPA 1971 Requirement: |
Minimum
20 |
| Material
Burst Strength: |
172 |
| MBS
NFPA 1971 Requirement: |
Minimum
50 |
| Cleaning
Shrinkage (+ = Grows / - = Shrinks): |
+ 0.2
% courses / - 2.0 % wales |
| CS
NFPA 1971 Requirement: |
Maximum
5 % (either way) |
| Care:
|
Machine
wash warm with regular detergent - no chlorine bleach.
Tumble dry low heat. DO NOT commercially dry clean. |
|
| Design: |
Two
piece construction with notched shoulder. |
| Overall
Hood Length: |
21 inches
|
| Head
Layers: |
2 ply
|
| Head
Length: |
From
top of head to neck: 13 inches |
| Head
Width: |
Back
seam to top of face: 9 inches/Back seam to bottom of head:
11 inches |
| Bib
Layers: |
2 ply
|
| Bib
Length: |
8 inches
(front and back) |
| Notched
Shoulder Design: |
From
top of head to bottom of notched shoulder: 15 inches |
| Insert
(Full Shoulder Model Only): |
Hood
bottom has shoulder insert sewn in to give added should
protection. |
| Sizing: |
One size
fits all. Do not modify, change or alter your protective
hood in any manner. |
| Face
Opening Relaxed: |
5 inches
(UL requirement 4.7-5.7 inches) |
| Face
Opening Stretched: |
15 inches
|
| Face
Opening Note: |
Face
opening is sewn with 1/2 inch elastic. |
|
|
CARE
Machine wash warm with regular detergent ? no chlorine
bleach.
Tumble dry low heat. DO NOT commercially dry clean.
WARRANTY INFORMATION
Your protective hood is warranted by the manufacturer to
be free from defects in material and workmanship. This warranty does not
cover normal wear or unusual exposures. This warranty is in lieu of all
other warranties, express or implied, including but not limited to, implied
warranties or marketability and / or fitness for a particular purpose.
The manufacturer shall not be liable for incidential or consequential
damages.
CERTIFICATION
UL Approved / NFPA Compliant
Meets or exceeds NFPA 1971-2007
Edition and is UL Certified
Meets or exceeds Cal/OSHA Standards.
|
|
|
