CMC ProTech Folding Roof Anchor, NFPA-G

CMC ProTech Folding Roof Anchor, NFPA-G

CMC ProTech Folding Roof Anchor, NFPA-G CMC

CMC ProTech Folding Roof Anchor, NFPA-G

Product Code:

Select your options above to check stock status.
Product SKU:


Designed by firefighters….for easy carry and a safer attachment.

  • UL Classified to NFPA 1983, 2006—General Use
  • Folds for easy storage and safe transport
  • Completely self contained
  • Opens in seconds to create a stable base
  • Installs in minutes with just a sledge
  • Safer, because spike point is never exposed
Quickly provides a secure anchor point for safer roof operations. The innovative CMC ProTech Folding Roof Anchor provides a stable, NFPA G-rated anchor point for fire or rescue operations in minimal time, and with no extra hardware or fasteners. You simply swivel the cross-bar support from under the anchor perpendicular to the main anchor base to creating a wide, stable platform that keeps the anchor properly upright. Unfold the spike all the way, which holds it at the optimum angle for maximum strength. Then set the anchor on the roof and hammer the sharply pointed ½ in. diameter spike into the roof’s surface. Its 5-1/2” penetrating depth will provide a secure hold in structurally sound materials.* When not in use, the spike folds into the anchor for safe storage and transport, with the sharp point fully protected until it’s actually hammered through the surface of the roof. 

*NOTE: While rated over 8,093 lbs. (36kN), the Roof Anchor's working strength is very dependent on the structural integrity of the surface, including any damage caused by the spike. Because of the highly variable strength of roof materials and difficulty in assessing this strength accurately, the use of a second Roof Anchor or multiple units should be standard protocol.

  • Dimensions: 10.5" x 3.5"
  • Spike Diameter: .5” (12mm)
  • Penetration Depth: 5-3/4"
  • Weight: 1 lb., 9 oz.
  • 3 OHM MBS: 36Kn
  • Spike length: 3 sigma MBS

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.