Streamlight 4AA ProPolymer LUX Div 2

Streamlight 4AA ProPolymer LUX Div 2

Streamlight 4AA ProPolymer LUX Div 2 Streamlight Inc.
TheFireStore

Streamlight 4AA ProPolymer LUX Div 2

$35.99
Product Code:
68244

Product Color:
BlackYellow
QUANTITY:
Select your options above to check stock status.
Product SKU:

 

Safety Rated Alkaline Battery-Powered Flashlight that provides a longer reaching, brighter beam that’s 10 times brighter than a high-intensity LED.

The 4AA ProPolymer® LUX is a high performance, 4 AA Alkaline powered, C4® LED flashlight. It features momentary or constant on operation. The body is constructed of an engineering polymer resin that is virtually indestructible, shock resistant, non-conductive and light weight. The case is O-ring sealed and water proof.

Class I locations are made hazardous by the presence of flammable gases, liquids or vapors. Class II locations are hazardous because combustible dusts are present. Class III locations contain easily ignitable fibers or flyings. Division 2 locations are where ignitable concentrations are not likely to exist under normal operating conditions or where Class 3 materials are stored or handled.

Features:
  • C4® LED technology, with a 50,000 hour lifetime
  • Unbreakable polycarbonate lens with scratch-resistant coating
  • 100 lumens typical; up to 4,200 candela peak beam intensity
  • Deep parabolic beam generator produces long range brilliance and smooth uniform pattern
  • Four "AA" size alkaline batteries
  • Ergonomically shaped for maximum hand comfort
  • Rubber-booted, tail end, push-button tail switch for one handed operation
  • Solid state power regulation provides maximum light output throughout battery life
  • 6 hour run time; 4 hrs. of regulated run time with 2 hrs. of declining usable light
  • IP67 Ingress Protection
  • Shock resistant (drop test verified).
  • Waterproof
  • Non-conductive; corrosion proof
  • Wrist lanyard connector
  • Assembled in USA
Case Material: Impact resistant engineering polymer resin. The lens cover is made from the same impact resistant polymer as the body
Dimensions: Length: 7 in. (17.78)
Body thickness: 0.97 in (2.46cm)
Width: 1.35 in. (3.43cm)
Facecap diameter: 1.69 in. (4.29cm)
Body diameter: 1.48 in. (3.76cm)
Lens: Unbreakable polycarbonate lens with scratch resistant coating
Light Source: One (1) Watt super high flux LED, 10,000 hour LED life
Light Output: 100 lumens
ON/OFF: Rubber booted, tail-end, push button switch for one handed operation
Run Time: 4 hours continuous at full intensity. 2 additional hours of declining useable output
Battery: Four (4) "AA" size alkaline batteries
Weight: 4.2 ounces (120 grams) ; 7.6 ounces (216 grams) with battery included in purchase
Approvals: Meets applicable European Community Directives
Division 2: UL Listed Class I, Division 2, Groups A, B, C & D; Class II, Division 2, Groups F & G; Class III; Temperature Code T3C
ATEX Zone 1: II 2GD EEx ib IIB T4 IP65 (T67C) - SNCH 04 ATEX 3639
Warranty: Limited lifetime warranty

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.