Task Force Tips Legacy AB Series 6

Task Force Tips Legacy AB Series 6"NH Ball Intake Valve

Task Force Tips Legacy AB Series 6 Task Force Tips Legacy
TheFireStore

Task Force Tips Legacy AB Series 6"NH Ball Intake Valve

$1612.50 - $1687.50
Product Code:
TFT-AB1ST-NX

QUANTITY:
Select your options above to check stock status.
Product SKU:

 

6" Female Swivel NH Ball Intake Valve

AB series Ball Intake Valve (BIV) has a 3.65" waterway and is designed for use with 6 inch (150mm) hose. The 30° intake elbow swivels 360° and has multiple positive detents. Make hose connections from any direction with minimal kinks and coupling stress. Designed for pressure or vacuum service on a pumper. Maximum operating pressure is 300 psi (20bar). Meets 900 psi (62bar) hydrostatic strength test. The aluminum castings are hardcoat anodized, and powder coat finished inside and out for maximum corrosion protection. All the components on the wet side of the valve are made of stainless steel for additional corrosion protection. The hand wheel needs 7.5 turns to open, meeting NFPA slow close requirements. There is a unique position indicator that shows the operator if the valve is open, closed or somewhere in between. The hand wheel is installed on the right sode of the valve, but can be switched to the left side if desired, top crank and electric remote controls are optional. Comes equipped with a rugged ¾ inch (19mm) drain valve to quickly drain water from the valve housing. A port for an optional air bleed valve is incorporated into the design for user friendly configurability. Hose couplings and truck connections are attached to the valve using polymer bearing rings which provide electrial isolation to help prevent galvanic corrosion.
 
AB1ST- NX NX-PS
Weight: 36.51 lbs (16.56kg) 36.51 lbs (16.56kg)
Water Flow Style: Valve with elbow Valve with elbow
Waterway Size: 3.65 inch (92.7mm) 3.65 inch (92.7mm)
Valve Actuation Method: Hand Wheel (6 inch, injection molded nylon) Crank
Valve Design: Ball Valve (stainless) Ball Valve (stainless)
Coupling Side Side A: 6 inch (150mm) 6 inch (150mm)
Coupling Style Side A: Handle Handle
Coupling Swiveling / Rigid Side A: Swivel (non-full time, no swivel after tightening) Swivel (non-full time, no swivel after tightening)
Coupling Size Side B: 5 inch (125mm) 5 inch (125mm)
Coupling Style Side B: Storz Storz
Coupling Swiveling / Rigid Side B: Rigid Rigid
Pressure Relief Valve: Has PRV Has PRV
Finish: Powdercoated Stardust Silver Powdercoated Stardust Silver
Gear Box Style: Shaft on side Shaft on side
Operation Energy Source: Manual Manual

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.