Task Force Tips Legacy AB Series 5-6

Task Force Tips Legacy AB Series 5-6" Female Swivel NH to 4" Swivel Storz Ball Intake Valve

Task Force Tips Legacy AB Series 5-6 Task Force Tips Legacy

Task Force Tips Legacy AB Series 5-6" Female Swivel NH to 4" Swivel Storz Ball Intake Valve

Product Code:

Select your options above to check stock status.
Product SKU:


AB series 5-6" Female Swivel NH to 4" Swivel Storz BIV

Ball Intake Valve (BIV) has a 3.65" waterway and is designed for use with 5 or 6 inch (125mm or 150mm) hose. The 30° intake elbow swivels 360° and has multiple positive detents. Make hose connections from any direction with minimal kinks and coupling stress. Designed for pressure or vacuum service on a pumper. Maximum operating pressure is 300 psi (20bar). Meets 900 psi (62bar) hydrostatic strength test. The aluminum castings are hardcoat anodized, and powder coat fnished inside and out for maximum corrosion protection. All the components on the wet side of the valve are made of stainless steel for additional corrosion protection. The hand wheel needs 7.5 turns to open, meeting NFPA slow close requirements. there is an unique position indicator that shows the operator if the valve is open, closed or somewhere in betwee, The hand wheel is installed on the right side of the valve, but can be switched to the left side if desired. The unit comes equipped with a rugged ¾ inch (19mm) drain valve to quickly drain water form the valve housing. A port for an optional air bleed valve is incorporated into the design for user friendly configurability. Hose couplings and truck connections are attached to the valve using polymer bearing rings which provide electrical isolation to help prevent galvanic corrosion. Includes an adjustable pressure relief valve with a discharge that can be directed one of four ways and meets NFPA 1901 (2009 edition).
Weight: 36.33 lbs (16.48 kg) 36.33 lbs (16.48 kg)
Water Flow Style: Valve with elbow Valve with elbow
Waterway Size: 3.65 inch (92.7mm) 3.65 inch (92.7mm)
Valve Actuation Method: Hand wheel (6 inch, injection molded nylon) Hand wheel (6 inch, injection molded nylon)
Valve Design: Ball Valve Ball Valve
Coupling Size Side A: 5 inch (125mm) 6 inch (150mm)
Coupling Style Side A: Handle Handle
Coupling Swiveling / Rigid Side A: Swivel (non-full time, no swivel after tightening) Swivel (non-full time, no swivel after tightening)
Coupling Size Side B: 4 inch (100mm) 4 inch (100mm)
Coupling Style Side B: Storz Storz
Coupling Swiveling / Rigid Side B: Swivel (full time, even after tightening) Swivel (full time, even after tightening)
Pressure Relief Valve: Has PRV Has PRV
Finish: Powdercoated Stardust Silver Powdercoated Stardust Silver
Gear Box Style: Shaft on side Shaft on side
Operation Energy Source: Manual Manual

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.