Task Force Tips Legacy MasterStream 1250 Series Nozzle, 100psi, 2.5

Task Force Tips Legacy MasterStream 1250 Series Nozzle, 100psi, 2.5" coupling

Task Force Tips Legacy MasterStream 1250 Series Nozzle, 100psi, 2.5 Task Force Tips Legacy

Task Force Tips Legacy MasterStream 1250 Series Nozzle, 100psi, 2.5" coupling

Product Code:

Select your options above to check stock status.
Product SKU:

Made In USA

MasterStream 1250 Electric Automatic Nozzle, 100 psi, 2.5" coupling

  • Automatic nozzle with electrically operated pattern control
  • Straight stream through dense wide fog patterns
  • Flow capability of 300 to 1250 GPM at a user adjustable pressure rating of 70 PSI to 120 PSI
  • Change nozzle operating pressure by means of an adjustment knob with pressure indicator on the front of the nozzle
  • Electric drive unit shall develop over 400 pounds of torque, enclosed in a waterproof cast aluminum housing
  • Includes a manual override device in the event the power source fails
  • Compatible with 12 or 24 volt power systems
  • Requires no more than a 3 amp power draw and include a 60" connection cable
  • Constructed from hardcoat anodized aluminum alloy
  • Includes a protective rubber bumper with fog teeth
  • Laser engraved serial number
  • Reflective labeling
  • 2-1/2" female NH swivel rocker lug coupling 
Operation Energy Source Electric (12/24 vdc)
Electrical Connection Method 6' of non-terminated wire (no smart stream)
Flow Control Method Automatic (constant pressure, variable flow, constant gallonage, flow does not change with pattern)
Flow Rate 300-1250 gpm (1100-4500 l/min)
Coupling Size (Nozzles) 2.5 inch (65 mm)
Coupling Style (Nozzles) Rocker
Coupling Swiveling/Rigid (Nozzles) Swivel (non-full time, no swivel after tightening)
Pressure 70-120 psi (4.8-8.3 bar)
Nozzle Body Style Tip only-Remote Controlled
Valve Design No Valve
Valve Actuation None
Fog Pattern Method Molded Rubber Teeth (fixed)
Nozzle Bumper Material Rubber - press fit
Certifications N/A
Hazardous Location Certification N/A

TFT MasterStream Nozzles are available in fixed or selectable gallonage, as well as automatic configurations in flow ranges from 500gpm up to 4000gpm. Either manual or remote control pattern selection is specifiable and many TFT master stream nozzles uniquely allow field selectable operational pressures.
TFT MasterStream Nozzles are designed for maximum flow efficiency, reach and penetration. All are produced from lightweight hard anodized aluminum alloy, and include fixed fog teeth for a wide protective fog pattern under harsh fireground conditions. The perfect choice for fixed and remote control monitor operations, aerial applications, and industrial specifications, all master stream nozzles are covered by TFT’s unique five year warranty and 24 hour service program.
TFT MasterStream Nozzles includes numerous configurations of stacked tips and high flowing smooth bore nozzles as well as the unique self-educting foam nozzle, the Master Foam. With over 30 models of combination master stream nozzles to choose from the perfect solution to maximizing fire streams operations under any fire ground condition. 

The Task Force Tips Masterstream Series Nozzles automatic nozzles operate by sensing the pressure at the nozzle’s inlet and adjusting the discharge opening to maintain a constant pressure throughout the flow range of the nozzle. While flowing, the stream pattern can be varied from wide fog to straight stream. Trapped debris can be removed without the use of tools.

The Task Force Tips Masterstream Series nozzles are deluge nozzles with clean, far reaching straight stream capability. They are adjustable from straight stream to a dense fog pattern.

These nozzles are constructed of hardcoat anodized aluminum and UV resistant rubber. Their rugged construction is compatible with the use of fresh water as well as firefighting foam solutions. A summary of each nozzle’s characteristics is shown in the table below.

Task Force Tips Masterstream Series Nozzles

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.