4" Remote Control Extend-A-Gun
The remote controlled telescoping waterway is capable of being lowered to deck level (or into a monitor well) for storage and transportation and is capable of being raised to an extended height of 18" using Auxiliary 1 push button and retract after the monitor has been parked by pressing the Park button on Task Force Tips RC monitor control stations or from optional panel mounted push buttons.
The unit includes a 12 volt motor capable of moving the waterway to either the raised or lowered position while maintaining the ability to horizontally rotate the monitor device 360 degrees. The weatherproof motor has an accessible manual override control for use in the event power failure occurs. An interface box with cables and waterproof plugs is provided for connection of power, monitor, Extend-A-Gun RC and optional push button controls.
A sensor is located on the waterway that signals a 12 volt indicator light installed in the cab to illuminate to indicate that the monitor is raised.
The aluminum riser has a 4" waterway; hardcoat anodized finish and is furnished with a 4" male NPT inlet coupling and a TFT Code RPM male connection for a TFT remote control monitor with TFT Code RPF female inlet.
The unit is covered by a five-year warranty.
||4.0" (100 mm)
|Operation Energy Source
||Electric (12/24 vdc)
||4" NPT Male