PGI Cobra™ Classic™ Hood Meta Aramind/Lenzing FR®

PGI Cobra™ Classic™ Hood Meta Aramind/Lenzing FR®

PGI Cobra™ Classic™ Hood Meta Aramind/Lenzing FR® Cobra Firefighting Hoods

PGI Cobra™ Classic™ Hood Meta Aramind/Lenzing FR®

Product Code:

Select your options above to check stock status.
Product SKU:


Developed as an economical alternative to Nomex®/Lenzing FR® blends.

  • Double-ply hood provides coverage of neck, upper chest and to the top of shoulder blades
  • Contoured shoulders reduce bunching of bib
  • Flat stitched seams
  • X-heavy 1/2" wide elasticized face opening
  • Cover stitched bound drape
  • Recommended for STRUCTURAL FIRE FIGHTING as well as other industries which require protection from flash fire, radiant heat, electric arc or cold weather
Developed as an economical alternative to Nomex®/Lenzing FR® blends. PGI utilizes a generic Meta-Aramid with similar flame, heat and chemical resistant properties to Nomex® brand Meta-Aramid, but at a lower price. PGI blends it with Lenzing FR® to give you a hood with exceptional softness, breathability and moisture management properties. The end result is a hood which performs similar to the popular Nomex®/Lenzing FR® blend at a lower price point.

Other properties of Meta-Aramid/Lenzing FR® include:
  • Inherently Flame Resistant
  • Minimal shrinkage in heat and flame
  • Comfortable, Excellent moisture absorbency – wicks moisture off skin so it can easily evaporate. Fabric has excellent breathability
  • Keeps you cooler in hot environments and warmer in cold environments
  • Low initial cost
  • Long wear life
  • Light weight- 6 oz./sq. yd.
  • Meets CAL-OSHA Requirements
  • Passes Fed. Test 191, Method 5903.2: CAL OSHA Sections 3406(d)
  • Complies with OSHA Rule 29 CFR Part 1910, 269

  • Outer shell and lining are Meta-Aramid/Lenzing FR® - approx. 6 oz. sq yd.
  • 1 x 1 rib knit fabric - knit to allow approx. 200% stretch for maximum stretch and recovery.
  • Calendared to minimize laundry shrinkage.
  • All stitching conforms to federal Standard 751 Specifications (FED-STD-751).
  • Major seams are flat seam assembled, stitch type 607.
  • Elastic in face opening is serged in with stitch type 504 and reinforced with bottom cover-stitch, stitch type 406.
  • Binding is applied with bottom cover-stitch, stitch type 406.
THREAD: All seams are sewn with 100% Nomex® thread size Tex 40.

  • Composed of two layers throughout.
  • Seamed from top of face opening to bottom back then cover-stitched for extra strength.
  • Face opening is circular in shape and serged with x-heavy duty ½" wide elastic around the perimeter. The elastic is then folded back ½" and cover stitched. The face opening stretches a full 16" (which is 25% more than conventional hoods) for easy donning and a snug fit around face of SCBA mask.  Face opening maintains original shape after repeated launderings.
  • The bottom edge of hood is bound with self-material bias binding.   
  • Shoulders are contoured on each side allowing the hood to lie flat on the chest and back for maximum coverage.

          PGI Classic Nomex Hood Measurements
  1. Face opening is circular and measures between 4.6" to 5.6" in diameter.
  2. Length of hood below face opening approx. 9".
  3. Length of hood at side from top to bottom approx. 15".
  4. Length of hood at front and back from top to bottom approx. 18½".
Arc Thermal Performance Value (ATPV)  
Thermal Protective Performance  
  Initial (seconds) 26.1
  After 5 washings (seconds) 26.7
After Flame  
  Initial (inches) 0 x 0
   Warp (wales) x Fill (Courses)  
  After 5 washings (seconds) 0 x 0
Char Length  
  Initial (inches) 3.0 x 2.9
  After 5 washings (inches) 2.8 x 2.9
Fabric Burst Strength (N) 327.5
Seam Burst Strength (N) 732.8
Heat and Thermal Shrinkage  
  After 5 washings .60 %
Limiting Oxygen Index (LOI) 29
Melt or Drip when exposed to flame None
  • Each hood is clearly labeled to identify material contents, UL Classification, Date of Manufacture, and Care Instructions. Included with each hood is a complete users information guide.
  • Meets or Exceeds Industry Standards
  • UL classified to meet or exceed European standard 13911-June 2008 (CE marked to EC directive 89/686/EEC); Compliant with CAL-OSHA, Sections 3406 and 3410(d) and OSHA Rule 29 CFR, Part 1910, 269.

          Comfort Plus Meta-Aramid/Lenzing FR

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.