PGI Cobra™ Elite™ Sure Fit™ Hood, Meta Aramind / Lenzing FR™

PGI Cobra™ Elite™ Sure Fit™ Hood, Meta Aramind / Lenzing FR™

PGI Cobra™ Elite™ Sure Fit™ Hood, Meta Aramind / Lenzing FR™ Cobra Firefighting Hoods

PGI Cobra™ Elite™ Sure Fit™ Hood, Meta Aramind / Lenzing FR™

Product Code:

Select your options above to check stock status.
Product SKU:


Keeps you cooler in hot environments and warmer in cold environments.

  • Double-ply hood with 3" wide panel for contoured fit
  • XL length covers chest, shoulders and shoulder blades
  • Tapered back and notched shoulder design helps bib lie flat in front and back
  • Flat stitched seams
  • X-heavy 1/2" wide elasticized face opening
  • Cover stitched bound drape
  • Label is sewn down on all four sides for comfort and permanency
Developed as an economical alternative to Nomex®/Lenzing FR® blends. PGI utilizes a generic Meta-Aramid with similar flame, heat and chemical resistant properties to Nomex® brand Meta-Aramid, but at a lower price. PGI blends it with Lenzing FR® to give you a hood with exceptional softness, breathability and moisture management properties. The end result is a hood which performs similar to the popular Nomex®/Lenzing FR® blend at a lower price point.

Other properties of Meta-Aramid/Lenzing FR include:
  • Inherently Flame Resistant
  • Minimal shrinkage in heat and flame
  • Comfortable, Excellent moisture absorbency – wicks moisture off skin so it can easily evaporate.  Fabric has excellent breathability
  • Keeps you cooler in hot environments and warmer in cold environments
  • Low initial cost
  • Long wear life
  • Light weight- 6 oz./sq. yd.
  • Meets CAL-OSHA Requirements
  • Passes Fed. Test 191, Method 5903.2: CAL OSHA Sections 3406(d)
  • Complies with OSHA Rule 29 CFR Part 1910, 269
  • Both outer shell and lining are a blend of Meta-Aramid/Lenzing FR® - approx. 6 oz sq yd.
  • 1 x 1 rib knit fabric - knit to allow approx. 130% stretch for maximum stretch and recov­ery.
  • Calendared to minimize laundry shrinkage.
Stitch Type and Seams:
  • All stitching conforms to Federal Standard 751 Specifications (FED-STD-751).
  • Major seams are flat seam assembled, stitch type 607.
  • Drape attachment to top is done with stitch type 401 and reinforced with stitch type 605.
  • Elastic in face opening is erged in with stitch type 503 and reinforced with bottom cover-stitch, stitch type 406.
  • Binding is applied with bottom cover-stitch, stitch type 406.
Thread: All seams are sewn with 100% Nomex thread size Tex 40.

  • Composed of a two layer top, bib and 3” wide Sure-Fit™panel for improved comfort, fit and performance.
  • Top is seamed from top of face opening to bib in back with a six thread flat seam for comfort. Bib is assembled and joined around circumference of top with two thread serge and then 5 thread cover-stitched for extra strength. Face opening is circular in shape and serged with x-heavy duty ½" wide elastic around the perimeter. The elastic is then folded back ½" and cover stitched. The face opening stretches a full 16" (which is 25% more than conventional hoods) for easy donning and a snug fit around face of SCBA mask. Face opening maintains original shape after repeated launderings.
  • The bottom edge of bib is bound with self-material bias binding and contoured at shoulders allowing the hood to drape on the chest and back for maximum coverage.
Cobra Elite Hood Measurements
  1. Face opening is circular and measures between 4.6" to 5.6" in diameter
  2. Length of hood below face opening approx. 11"
  3. Length of hood at side from top to bottom approx. 15"
  4. Length of hood at back from top to bottom approx. 19"
Fabric Performance Values:
Arc Thermal Performance Value (ATPV)  
Thermal Protective Performance  
  Initial (seconds) 26.1
  After 5 washings (seconds) 26.7
After Flame  
  Initial (inches) 0 x 0
   Warp (wales) x Fill (Courses)  
  After 5 washings (seconds) 0 x 0
Char Length  
  Initial (inches) 3.0 x 2.9
  After 5 washings (inches) 2.8 x 2.9
Fabric Burst Strength (N) 327.5
Seam Burst Strength (N) 732.8
Heat and Thermal Shrinkage  
  After 5 washings .60%
Limiting Oxygen Index (LOI) 29
Melt or Drip when exposed to flame None
  • One size hood fits all
  • Each hood is clearly labeled to identify material contents, NFPA acceptance, UL Classification, Date of Manufacture, and Care Instructions.  Affixed to each hood is a complete users information guide.
  • Meets or exceeds industry standards
  • Compliant with CAL-OSHA, , Sections 3406 and 3410(d) and OSHA Rule 29 CFR, Part 1910, 269. 

       Comfort Plus Meta-Aramid/Lenzing FR        PGI Sure Fit Logo

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.