DUPONT™ PROSHIELD® 3, 5” UNIVERSAL SHOE COVERS, 200 per case

DUPONT™ PROSHIELD® 3, 5” UNIVERSAL SHOE COVERS, 200 per case

DUPONT™ PROSHIELD® 3, 5” UNIVERSAL SHOE COVERS, 200 per case DuPont
TheFireStore

DUPONT™ PROSHIELD® 3, 5” UNIVERSAL SHOE COVERS, 200 per case

$117.99
Product Code:
DPT-P3450SGY00020000

QUANTITY:
Select your options above to check stock status.
Product SKU:

 

DuPont's ProShield® 3 Shoe Covers provide you with enhanced skid resistance and barrier performance to keep you sure-footed and safe while on the job.

ProShield® 3 fabric, used exclusively for shoe and boot cover products, is a spunbonded polypropylene substrate that is coated with a low-density polyethylene film for enhanced skid resistance and barrier performance. DuPont's ProShield® Shoe Covers work well in a variety of applications, including general maintenance and hospital visitation.

  • 5" high shoe cover with elastic top
  • Made of spunbonded polypropylene coated with a low-density polyethylene film
  • ProShield® 3 sole material provides enhanced skid-resistance
  • One size fits most
  • Shoe covers are sold only by the case (200 per case).

Special Warnings

  1. *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
  2. *Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek®, Tyvek® Dual, ProShield®, ProShield® Basic, ProShield® NexGen®, Tyvek® FC, and ProShield® 3 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Tyvek® Xpert and Tyvek® Plus offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem® QC and Tychem® SL garments with taped seams.
  3. *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the nature and level of hazards and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric.
Please contact DuPont for specific data. These garments are intended for limited use and should be disposed of after single use. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc are damaged, end user should discontinue use of garment to avoid potential exposure.

Physical Properties - Typical Values

ProShield® 3 - Fabric Data
Property Test Method Result
Basis Weight ASTM D3776 2.5 oz/yd2
Tear Resistance - Trap Tear (MD) ASTM D1117 7 lbf
Tear Resistance - Trap Tear (CD) ASTM D1117 10 lbf
Breaking Strength - Grab (MD) ASTM D5034 29 lbf
Breaking Strength - Grab (CD) ASTM D5034 23 lbf
Wearing Apparel Flammability 16 CFR 1610  Help Class 1
*Typical values, not specifications.

Chemical Resistance Data

ProShield® 3 - Fabric Data
Hazard / Chemical Name CAS Number Phase Breakthrough Time 
(average, normalized to 0.1 µg/cm2/min) / Performance
Animal Waste (non-hazardous; solid) unknown Solid May be Suitable for Use
Crude oil on wildlife mixture Liquid May be Suitable for Use
Dirt (general) unknown Solid May be Suitable for Use
Feces (solid) unknown Solid May be Suitable for Use
Grease (general) unknown Liquid May be Suitable for Use
Non-Hazardous Particles (larger than 1 micron in size) unknown Solid May be Suitable for Use
Sewage unknown Liquid May be Suitable for Use
Tar balls unknown Solid May be Suitable for Use

Finished Dimensions

Typical Finished Dimensions
Boot Length Size Boot Height Men's Shoe Women's Shoe
17 1/2 00 5 23 25

Graphic showing the standard measurements of a DuPont ProShield shoe cover


Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.