DUPONT™ PROSHIELD® NEXGEN® HIGH BOOT COVERS, 100 per case

DUPONT™ PROSHIELD® NEXGEN® HIGH BOOT COVERS, 100 per case

DUPONT™ PROSHIELD® NEXGEN® HIGH BOOT COVERS, 100 per case DuPont
TheFireStore

DUPONT™ PROSHIELD® NEXGEN® HIGH BOOT COVERS, 100 per case

$159.59
Product Code:
DPT-NG456SWHSM010000

Apparel Size:
SmallMediumLargeX-Large
QUANTITY:
Select your options above to check stock status.
Product SKU:

 

DuPont's ProShield® NexGen® Boot Covers protect your feet against non-hazardous particles, light liquid splash, and aerosols in many industrial applications.

ProShield® NexGen® garments are made with a microporous film that is laminated to a spunbonded polypropylene substrate. Applications include: automotive refinishing, waste cleanup, and remediation.

  • 18" high boot cover with elastic top provides coverage up to calf
  • Made of spunbonded polypropylene laminated with a micro-porous film
  • PVC soles provides enhanced skid-resistance and durability
  • One size fits most
  • Boot covers are sold only by the case (100 per case).

Special Warnings

  1. *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
  2. *Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek®, Tyvek® Dual, ProShield®, ProShield® Basic, ProShield® NexGen®, Tyvek® FC, and ProShield® 3 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Tyvek® Xpert and Tyvek® Plus offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem® QC and Tychem® SL garments with taped seams.
  3. *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the nature and level of hazards and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric.
Please contact DuPont for specific data. These garments are intended for limited use and should be disposed of after single use. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc are damaged, end user should discontinue use of garment to avoid potential exposure.

Physical Properties - Typical Values

ProShield® NexGen® - Fabric Data
Property Test Method Result
Thickness ASTM D751 10 mils
Basis Weight ASTM D751 1.8 oz/yd2
Tear Resistance - Trap Tear (MD) ASTM D1117 11 lbf
Tear Resistance - Trap Tear (CD) ASTM D1117 7 lbf
Breaking Strength - Grab (MD) ASTM D5034 23 lbf
Breaking Strength - Grab (CD) ASTM D5034 11 lbf
Hydrostatic Head AATCC 127 68 inches H2O
Surface Resistivity (25°C / 55% RH) ASTM D257 1.0 x 10^9 ohms/square
Wearing Apparel Flammability 16 CFR 1610 Class 1
*Typical values, not specifications.

Chemical Resistance Data

ProShield® NexGen® - Fabric Data
Hazard / Chemical Name CAS Number Phase Breakthrough Time (average, normalized to 0.1 µg/cm2/min) / Performance
Animal Waste (non-hazardous; solid) unknown Solid May be Suitable for Use
Crude oil on wildlife mixture Liquid May be Suitable for Use
Dirt (general) unknown Solid May be Suitable for Use
Feces (solid) unknown Solid May be Suitable for Use
Grease (general) unknown Liquid May be Suitable for Use
Non-Hazardous Particles (larger than 1 micron in size) unknown Solid May be Suitable for Use
Sewage unknown Liquid May be Suitable for Use
Tar balls unknown Solid May be Suitable for Use

Finished Dimensions

Typical Finished Dimensions
Size Boot Length Boot Height Men's Shoe Women's Shoe
SM 9 3/4 18 2 4
MD 11 3/4 18 7 9
LG 14 18 13 15
XL 16 18 19 21

Graphic showing the standard measurements for a DuPont protective boot cover.


Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    Are these NFPA 1999 compliant? If so, is there any documentation that can show it? I am over EMS program for a federal fire dept and we have now taken NFPA as doctrine rather than guidelines so I am trying to purchase boot covers to check a box for an inspection. Thanks
    Asked on 8/10/2016 by John from Utah

    1 answer

    • CUSTOMER CARE

      A:

      This product is not NFPA 1999 compliant.

      Answered on 8/17/2016 by AG
Displaying question 1

Do you have a question about this product?