NIGHTSTICK Tactical Fire Light

NIGHTSTICK Tactical Fire Light

NIGHTSTICK Tactical Fire Light Nightstick
TheFireStore

NIGHTSTICK Tactical Fire Light

$39.96 - $46.62
Product Code:
NS-FDL-300R

Flashlight Options:
Light Onlywith Helmet Mount
QUANTITY:
Select your options above to check stock status.
Product SKU:

 

The Tactical Fire Light with Multi-Angle Helmet Mount

A complete system for attaching the Tactical Fire Light to any Fire Helmet or Hard Hat. The Tactical Fire Light is rated at 180 Lumens and has a tight long-throw beam that is distance rated at 190 meters. The entire system is IP-X7 waterproof and is drop rated at 2 meters. The mount can be attached to either side of the helmet to provide hands-free illumination for the wearer. Additionally, the user can set the angle of the mount through 140 degrees of adjustment to provide clearance around face shields, goggles or other helmet-mounted equipment. The FDL-300R-K01 meets the requirements of NFPA-1971-8.6 (2013).
 
  • CREE LED technology – 50,000 + hours LED life
  • Momentary or constant-on flashlight
  • Large textured tail-switch
  • Will fit on virtually all Fire Helmets and Hard Hats
  • Can be mounted to the brim on either side of most helmets
  • Allows user to determine exact position for optimum light alignment
  • 140 Degrees of angle adjustability to clear face shields, goggles or other equipment
  • Glass-filled nylon polymer flashlight housing
  • Mount is cast from 700 Series Aluminum/Zinc Alloy
  • Waterproof
  • Impact & chemical resistant
  • Meets the requirements of NFPA-1791-8.6 (2013)
  • Powered by 2 – CR-123 Lithium batteries (included)
  • Includes Light, Mount, Light Mounting Allen Set Screw, 2 different length Brim Mounting Allen Set Screws, Allen Wrench & 2 – CR-123 Lithium batteries
  • Flashlight Lumens: 180
  • Beam Distance: 190 m
  • Candela: 9,150
  • Drop Rating: 2 m
  • Water Rating: IP-X7
  • Flashlight Run-time: 3
  • Type of Switch: Single Tail Cap Switch - Momentary or Constant-on Flashlight
  • Light Source: LED
  • Case Material: Glass-filled Nylon Polymer & 700 Series Aluminum/Zinc Alloy
  • Body Color: Red/Black
  • Battery Quantity: 2
  • Power Source: CR-123 Lithium Primary Batteries
  • Length: 5.5 in (140 mm)
  • Handle Diameter: 1.035 in (26 mm)
  • Head Diameter: 1.25 in (32 mm)
  • Weight: 6.1 oz (173 g)
  • Package Contents: Light, Mount, Light Mounting Allen Set Screw, 2 different length Brim Mounting Allen Set Screws, Allen Wrench & 2 – CR-123 Lithium Batteries
  • Warranty: Limited Lifetime
Please Note:  When tightening the bracket, the set screws will engage.   After a few turns the brackets will start to spread apart and you will feel it tighten up.  Stop there.

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.