Compact Microphone Controller
All siren and light functions are located on the 650 series microphone. Ten rubberized
push buttons control three progressive “slide switch-like” positions, on/off, PA, Air
Horn, Peak-and-Hold, tone switching, and up to 30-amps of additional auxiliary
power. The microphone controller “snaps” into a small plastic remote junction box
where PA volume and a secondary on-off switch are located, then runs directly
to the 650 series amplifier. Both of these connections are plug-and-play via eight
conductor telephone jacks. An innovative microphone holder that can rotate and
pivot to almost any angle allows for a wide variety of installation possibilities.

Advanced Amplifier Design
The 650 series remote siren provides 100-watt speaker output and can operate from
any 12-volt negative ground vehicle electrical system. It is short circuit protected
and can be powered through an installed power distribution center (PDC), or
directly from the vehicle’s battery. Reliability and efficiency is maximized by the
use of advanced microprocessor based technology. The 650 series amplifier comes
equipped with eight 10 amp lights or auxiliary relay connections, is horn ring control
ready, and has it’s own bracket mount to allow for quick and easy removal or
replacement. Also provided is a 16.5' wire harness and all necessary hardware.

Features:

• Microphone controlled siren amplifier and light functions.
• Progressive 3-position “slide switch like” push button control.
• Backlit/rubberized microphone control head.
• Microprocessor based amplifier with plug-and-play connections.
• Eight 10-amp light and Aux relay positions.
• 100-watt output – Wail, Priority, Air Horn, Manual Peak, and Hold tones.
• Versatile microphone and amplifier mounting brackets.
• Remote on/off switch box with built-in PA volume control.
• Horn ring transfer.
• Installs quickly and is easy to operate.

Specifications: