The BJ005 is the newest member of the Blackjack family and designed to allow the user to remove a light, use it in hand and reattach it easily to the helmet with a gloved hand during fire ground operations, no tools necessary!The BJ005 still incorporates PATENTED under the brim, multiple points of contact, line of sight design found in other Blackjacks. This model is made from proprietary high temperature thermoplastic and is adjustable and works with most round lights from 2AA, to tactical including RECHARGEABLES!
Note:Flashlight not included.
Lightweight: only 1.8oz
Tough: Made from proprietary high temperature thermoplastic
Totally Secure: Superior patented design securely holds the light under brim of the helmet with a couple well-placed setscrews. Because the front of the light rests against the helmet, creating a second point of contact, the light firmly stays in place without the need to over-tighten the screws.
The BLACKJACK securely mounts today’s most popular handheld fire and tactical flashlights to your fire helmet, at a fraction of the cost of weapon-style helmet lights. Because it holds the light under the brim of your helmet, it’s protected against impact, snags, and dirt.
And the light is aligned closer to your line of sight for increased visibility. The BLACKJACK’s patented design and virtually unbreakable, solid aircraft-grade aluminum construction keeps your light in place. Right where you put it. Right where you need it. Right on the money.
NOW WITH A LIFETIME WARRANTY!
Ratings & Reviews
Broke after first use
The concept is good but the little white plastic part of the screw that holds the light broke after the first use. I would not recommend this model; I sent it back in an attempt to get the other blackjack model that is not ""easy on/easy off.""
Light works great on calls at night and during training couldn't be any more impressed. Very bright lights up a lot of the area your in
Very nice and priced perfectly
Really intuitive design
i pre- ordered from black jack directly and once i finally received it i was surprised, the only thing that could be a problem in the future is that the product is a plastic material by i feel that i will be able to withstand the heat as long as you can yourself, with the right light this is a solid design from a reputable company and i would recommend this to anyone who would want the versatility to be able to remove there helmet light and use it in hand and re install it with a snap in seconds, this is a no brain-er for the firefighting community.
This is a great mount works well
This is a great mount very light weight and durable , I had to play with mounting positions due to my goggles instead of face shield , but once I figured that out its been great , I have the lensor led v2 dual color light in it which is awesomely me having the choice between red and white lights
Very Nice Mount
Be careful if you are expecting to use this with a CR123 battery light. My Surefire G2 is a little big, so I will not use this as its intended. The G2 does not snap in and out very easily. I mounted my G2 and tightened the set screw essentially making it a perm mount. I am recommending this to my son, who starts the fire academy next week.
Broke after 4 months
Install of Fenix UC35 to under brim of structure helmet was great. Unfortunately the mount broke after less than 4 months of use. The break is not repairable and is a complete separation from the light mount to the helmet mount. Was anticipating the material to be of heavier duty material and be more durable.
Have only put to the test once so far so goid
Seems to be a good but.
Cheap quality, flashlight is not secure
When attempting to secure a flashlight by tightening down the screw, the holder itself bends outwards instead. My $60 flashlight is held shakily and I'll be replacing the holder as soon as I can. It's already popped out twice on calls
"will this mount work with the flash light i have?? i have a streamlight polytac flashlight. thanks"
Yes, the BJ005 will work great with your Streamlight PolyTac light. That was one of the lights that we actually used when we were designing the BJ005. Enjoy, stay safe. Chris, Blackjack
"What is the largest diameter flashlight this holder will accept?"
Chris, The BJ005 is designed to fit lights up to 1"" in diameter. That is a general rule as almost every light differs somewhat in barrel of the light. It would help if I knew exactly which light we were talking about. I have tested it on a lot of lights when we were designing it all last year. You can always contact me directly at the Blackjack website for specific questions. Chris
"What is the Lumen rating for this flaslight ?"
Flashlight not included with the holder. Works with most round lights from 2AA, to tactical including RECHARGEABLES!
"Will this work with helmet cameras that use an older blackjack mount? Such as the Firecam1080?"
That information is currently not available.
"will this hold the Streamlight ProTac HL 600 lumen flashlight?"
Dusty, it looks very much like it will, but i'm not 100 % sure .
"I am a cave diver and need a mount for one of my back up lights. I need a mount that is easy to remove the light and reattach it with no problems. Do you feel that this mount would work well on the side of a helmet like a Bump Helmet? Will this hold a small backup light such as the Intova?"
Al, I'm not sure what you mean when you say a bump helmet or a Intova light?Neither of these are a firefighter items, so I'm not going to say one way or the other
"I have a Streamlight strion that i generally carry with me on calls as a backup and was curious about this mount for two reasons. 1.) will my strion fit this mount (I think it has a one inch diameter)? 2.) will my light get marred or scratched up by the set screw in the mount that holds it in place?"
1st question; From what I can see it should fit, 2nd question, that will depend on how tight you screw the set screw down. Sorry if these seem like short answers but it's the best we have to go with.
"What is the maximum diameter of this product? I have a LUX-PRO LP600 that I love, and I am trying to find a mount for it. It looks to be about 1 1/4"" in diameter, but I can't find exact diameter specs on it. Will this product work on this light, and if not, can you recommend a mount that will accommodate my light? Thank you."
The BJ005 is designed to fit lights up to 1"" in diameter. That is a general rule as almost every light differs somewhat in barrel of the light.
"i hav streamlight stinger will it fit in this holder"
The BJ005 is designed to fit lights up to 1"" in diameter. That is a general rule as almost every light differs somewhat in barrel of the light. There are several model stingers, LED HL, LED HP, DS LED, PolyStinger LED Haz-LO, PolyStinger DS LED, and the Classic LED, all with different dimensions.
"Will this holder work well with a mimi mag light?"
Well we know it will work with a light that is 1"" in diameter, does your light meet that size? If so it should work.
"Is this product compatible with the Bright Star Lighting Products: Razor Intrinsic LED Flashlight with Zone Zero Intrinsic Safety Rating, 7"" Long"
Did you look at our web page? there's a flim clip that tells you what lights that will fit.
"Will this mount work on the Fire Cam mini HD cameras?"
we think it should, what's wrong with the Black Jack holder that came with the camera?
"Will this one work with the Streamlight 4AA ProPolymax C4 LED Flashlight?"
We think it would be a tight fit, the 4AA is a little larger than 1""
Your question has been successfully submitted !
Please write your question before you submit !