$8,129.59 - $11,209.59

C.E.T. Fire Pumps Drop-in Portable Pump Skid Unit

SKU: W-CET-DI//Ships from Manufacturer

Details

C.E.T.'s Drop-in Portable Pump Skid Unit includes a 200 gallon water tank, a live hose reel, and a portable fire pump with an engine for spraying water on structural, car, or wildfires.

A 200 gallon fully baffled polypropylene water tank, a low profile electric rewind hose heel, and a portable 20hp Mid Range fire pump with a 4-stroke Kohler gas powered 20hp V twin engine: these three tools are combined into a single one-piece assembly that can be slipped onto a truck bed or a trailer or into a body. Designed by C.E.T. Fire Pumps, which has been manufacturing reliable, high quality portable fire pumps for over 80 years, the Drop-in Portable Pump Skid Unit can be used to efficiently spray flowing water on structural fires, car fires, or wildfires. Since the most common Wildland and urban interface fire engines in North America combine a small truck with a water tank and a high performance pump, this skid unit is excellent for municipal/industrial fire departments and all forestry fire authorities to use while firefighting. With a two year overall warranty on the pump and components and a limited lifetime warranty on the water tank, C.E.T.'s Drop-in Portable Pump Skid Unit will serve your team's firefighting needs well for years to come.

  • 200 gallon fully baffled polypropylene water tank
  • 20hp Mid Range fire pump
  • 4-stroke Kohler gas powered, 20hp V Twin engine; air cooled, 12 volt electric start with recoil backup
  • Low profile electric rewind hose reel
  • 100 feet of 1” booster hose

Standard Equipment:

Water Tank (standard capacity: 200 gallons)

  • Constructed of 1/2" thick polypropylene sheet stock with PolymarCo-PP™ resin; Limited LIFETIME Warranty
  • Welded with heavy duty extruded joint
  • Certified, high quality, non-corrosive, stress relieved thermo plastic, black with textured finish, and UV stabilized for maximum protection
  • Standard configuration designed to have complete modular slide in capability
  • Incorporate transverse partitions manufactured for 3/8" PT2E polypropylene which interlock with a series of longitudinal partitions constructed of 3/8" PT2E polypropylene
  • Designed to allow for maximum water and air flow between compartments and are fully welded to each other as well as to the inside of the tank
  • The passenger side rear wall of the tank has standard built in sight gauge 3" wide and 70% transparent
  • Equipped with a combination vent/overflow and manual fill tower
  • 8" x 8" x 8" square hinged type cover located in the right rear corner of the tank
  • Vent / overflow piped internally toward the front and exit out the front tank wall with a 1/2" extension past the front tank wall
  • Constructed of 1/2" thick PT2E polypropylene, black, UV stabilized

Skid Base

  • Full width skid base manufactured of 3/4" PT2E polypropylene welded to the tank (48" W  x 96" L) and extends 34" past the tank in the rear to allow for pump mounting
  • Mounting supported by ½" PT2E polypropylene gussets approximately 15" H by 32" L
  • Gussets equipped with 2" holes to assist in lifting the unit
  • Mounts allow for the truck to be secured directly to a truck bed without the need for any skid frame work underneath
  • Tank will be baffled in accordance with latest NFPA requirements

Hose & Reel

  • A Low Profile Hannay 12v electric rewind booster reel capable of handling a maximum of 100' of 1" rubber only booster hose (hose included) is installed on the tank top
  • Hose reel is protected against power shortage and has a push button rewind control and a backup geared crank rewind handle
  • Equipped with a 1" NPT 90 degree swivel inlet, and a 1" NST outlet riser
  • Reel discs and drum constructed of steel and be red in color

Available in Two Configurations:

20 HP Kohler Engine

  • 200 fully baffled polypropylene water tank
  • 20hp Mid Range fire pump
  • 300gpm at 10psi, 190gpm at 100psi and 45gpm at 200psi
  • 3 gallons external fuel tank
  • Lighted control panel
  • Low profile electric rewind hose reel
  • 1” x 100 foot booster hose
  • 2.5 inch valved tank to pump
  • 1.5 inch service line with cap and chain
  • ¾” GH service line with cap and chain

Pump

  • Pump is a CET DI-PFP-20hpKHL-MR Single stage Mid Range centrifugal pump, bolted directly to the engine, with a 2.5" NPT suction inlet
  • Pump piping is flexible to prevent any breakage caused by vibration
  • Capable of a maximum discharge volume of 300 GPM at 10 PSI, and a maximum discharge pressure of 200 PSI while pumping 45 GPM
  • At center of the performance curve, the pump will be capable of pumping 115 GPM at 150 PSI
  • A control panel is installed on the pump including a master switch, master discharge pressure gauge and panel light for night operations
  • Equipped with a Noise Reducing Exhaust priming system capable of 20' - 30' lift for fast positive priming

Engine

  • Pump driven by a 4-stroke Kohler gasoline powered, 20 horsepower single cylinder engine; air cooled, 12 volt electric start with recoil backup
  • Fueled from a 3 gallon external fuel tank mounted on tank top
  • Connected with a quick disconnect weather proof style connection
 

6.5 HP Honda Engine

  • 200 fully baffled polypropylene water tank
  • 6.5hp twin impeller fire pump
  • 70gpm at 10psi, 40gpm at 100psi and 20gpm at 125psi
  • 1.5 gallons integrated fuel tank
  • Lighted control panel
  • Low profile electric rewind hose reel
  • 1” x 100 foot booster hose
  • 2.5 inch valved tank to pump
  • 1.5 inch service line with cap and chain

Pump

  • Pump is a CET DI-PFP-6hpHND-EM-Twin two (2) stage centrifugal pump, bolted directly to the engine, with a 1.5" NPT suction inlet
  • Pump piping is flexible to prevent any breakage caused by vibration
  • Capable of a maximum discharge volume of 80 GPM at 10 PSI, and a maximum discharge pressure of 150 PSI while pumping 20 GPM
  • At center of the performance curve, the pump will be capable of pumping 50 GPM at 100 PSI
  • A control panel is installed on the pump including a master switch, master discharge pressure gauge and panel light for night operations
  • Equipped with a self priming system capable of 10' - 15' lift for fast positive priming

Engine

  • Pump driven by a 4-stroke Honda gasoline powered, 6.5 horsepower single cylinder engine; air cooled, 12 volt electric start with recoil backup
  • Fueled from a 1.5 gallon fuel tank mounted on engine
  • Connected with a quick disconnect weather proof style connection

Warranty: Two (2) year overall warranty on pump and components; Limited Lifetime Warranty on Water Tank.

Due to dimensions and weight of this unit, special handling fees will added to your cart on these items. This item is excluded from shipping promotions.

Note: Skid units can be customized according to your department’s specific needs and can be specially ordered for you. For special orders, please contact our Inside Sales Team.

About C.E.T.
C.E.T. Fire Pumps Mfg. has been manufacturing reliable, high quality portable fire pumps for over 80 years and offers a complete line of portable fire pumps with over 20 standard models to choose from including gas and diesel engines, skid mounted, trailer mounted, floating and more! C.E.T. Fire Pumps Mfg. also offers custom manufacturing to meet your specialized department requirements.

 

Ratings & Reviews

No reviews available

Be the first to Write a Review

Q&A's:

"can I get a 500 gal tank with the koler pump"

Ron this can be done, but we'll need more information before it can be made, everything is made to order.

"How much does the unit weight?"

Approx 1200 lbs, without water

"do you offer this units with foam capibility"

Yes, CET offers a foam unit either a class A system or a class B

"how much would a skid unit with a 200 gallon tank and honda engine weigh full of water"

Any where from 1950 to 2000 pounds