Majestic Fire Apparel Fire Ink 960 C6 Skull Hood Glow-In-The-Dark



Fire Ink 960 C6 Glow-In-The-Dark Skull Hood

When exposed to flame, CarbonKnight fibers expand, creating an Oxygen starved environment so fire cannot continue. This hood's one piece flared back design spreads material out across back and over shoulders for generous coverage and fit. The wider width increases air circulation and keeps the end user cooler. The generous width and size means less fabric stretch. The more surface area for moisture disbursement, the quicker moisture will evaporate - keeping end user dry!

MFA hoods offer the most square inches of protection!

  • Overall length: 20"
  • 2 ply material
  • Flared design
  • Self extinguishing
  • Inherently flame resistant (no harsh chemical treatments)
  • Odor neutralizing
  • Anti-Static
  • Low Heat Conductivity
  • Maintains performance values after laundering
  • Finished to minimize shrinkage Rib knit allows for stretch and shape retention
  • 65% Oxidized Polyacrylonitrile (OPF) / 35% artificial tri-blend
  • 1 x 1 Rib Knit
Ultra C6 (carbon BLACK) is 4th generation of advanced CARBON technology.

There are 3 elements needed for fire: Oxygen, Heat, and Fuel. Without one element, a fire cannot start or continue. When exposed to flame, CarbonKnight fibers expand, creating an Oxygen starved environment, so fire cannot continue. Material is self extinguishing and inherently flame resistant (no harsh chemical treatments). These hoods are finished to minimize shrinkage. Rib knit allows for stretch and shape retention.

Majestic Fire Apparel is a vertical manufacturer, knitting their own fire retardant materials for over 17 years. Majestic Fire Apparel  knits, cuts, sews, and ships - all from their location in PA.

Owner Identification:
On the label the area of PROPERTY OF: _____. Today every Majestic hood is manufactured with a NEW OWNER ID label. Simply identify your ownership with any permanent marker, directly on label.

Labeling - each hood comes individually labeled to identify fabric, hood style, lot # traceability, DOM, Cleaning and Storage Instructions, and UL Certification.

Users Information Guide - each hood has a Warnings & Users Information Guide attached with imperative information. Please review before wearing.

Cleaning and Storage:
Machine wash only using regular detergent. Do not use chlorine bleach or detergents containing chlorine. Do not use fabric softeners or detergents containing fabric softeners. Water temperature not to exceed 130 degrees F. Do not wring hood. Squeeze hood to remove excess water. Shape and lay flat in a dry, cool, shaded location to dry. Or tumble dry, low heat. Do not commercially dry clean. Do not store your hood in direct sunlight.

Meets CAL-OSHA Requirements
Passes Federal Test 191, Method 5903.2; CAL OSHA Sections 3406(d)
Complies with OSHA Rule 29 CFR Part 1910, 269
Fabric Performance Values in accordance with NFPA 1971 test report performed by Underwriters Laboratories
ATPV and HAF values found in accordance with ASTM International Standard Test Method F1959-1999. Tests performed by Hugh Hoagland
All weights and measurements are approximate

Ratings & Reviews

No reviews available

Be the first to Write a Review