Nonin Reusable Soft Sensor Finger Pulse Oximeter Sensor

Accurate readings with PureLight technology

Nonin Medical has designed the PureLight reusable sensors for patients of all sizes and clinical presentations. The reusable sensors are ideal for short-term monitoring, stress testing, spot checks or any situation where the risk of cross-contamination is low. A comfortable sensor, each is designed for a specific application and is form-fitted to decrease ambient light interference.

• Quick and easy spot check application
• Comfortable fit for continuous monitoring
• Durable design delivers consistent performance
• Suitable in many medical settings (EMS, Hospital, Sleep)
• Easy to clean with isopropyl alcohol
• Latex-free
• Two-year warranty

The PureLight Principle
Red and infrared light sources (LEDs) are essential to pulse oximetry sensors.

• The red LED measures deoxygenated hemoglobin
• The infrared LED measures oxygenated hemoglobin

Common red LEDs may produce a secondary spectrum emission (contamination)

• Contamination impacts the oxygenated hemoglobin measurement
• LED contamination affects an oximeter's calibration curve resulting in inaccurate SpO₂ readings below 80%

PureLight red LEDs only produce the pure light spectrum

• PureLight LEDs do not cause a shift in the oximeter's calibration curve at SpO₂ levels below 80%
• Nonin PureLight sensors eliminate variations in readings from patient to patient and sensor to sensor

 
Specifications:
8000SS Small 1m/3m/WristOx 4100

• Digit thickness: 7.5 to 12.5mm (0.3 to 0.5in)
• Preferred application: Fingers, Toes

8000SM Medium 1m/3m/WristOx 4100

• Digit thickness: 10 to 19mm (0.4 to 0.75in)
• Preferred application: Fingers, Toes

8000SL Large 1m/3m/WristOx 4100

• Digit thickness: 12.5 to 25.5mm (0.5 to 1in)
• Preferred application: Fingers, Toes

For use with Nonin products.