$65.99
List: $80.00 |Save: $14.01

ESS FirePro-1971 EX-2 Structural Firefighting Goggles, Snap Mounts, NFPA 2013

SKU: ESS-740-0536//OUT OF STOCK
In stock in approximately 3 weeks.

Details

ESS FirePro-1971 EX-2 Structural Goggles

With low-profile frames and anti-fog lenses, ESS FirePro-1971™ structural firefighting goggles are the most advanced on the market.

This goggle series is certified as compliant with NFPA 1971-2013 Edition, including the 5-minute, 500°F oven test.  It is also U.S. Federal OSHA compliant, exceeds the requirements of ANSI Z87.1-2010, and is considered Primary Eye Protection by NFPA 1500.  All components of ESS FirePro-1971™ goggles are heat and flame resistant.

The FirePro-1971 EX-2™ model features a two-piece strap with Snap-on/Snap-off mounting brackets that easily secure to brimmed helmets, no drilling required.

This patented system allows the goggles to be kept on the front or back of a helmet, or quickly removed and stowed in a pocket.

This configuration is recommended for use with or without face shields.

Other Key Features:

  • Patented ESS Speed-Clip™ strap system makes adjusting the tension of FirePro™ goggle straps quick and easy, even with gloves on. 
  • ClearZone™ FlowCoat lens treatments provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside.
  • Low-profile frame with wide wrap minimizes helmet interference and maximizes peripheral vision.
  • Full-perimeter ventilation and filtration system further minimizes lens fogging while filtering airborne particles, dust, and debris.  
  • Extra-thick, 2.8 mm high-impact Profile™ Series military goggle lenses that meet and exceed ANSI Z87.1-2010, the U.S. Military .22 caliber ballistic impact test MIL-DTL-43511D (Clause 3.5.10), and CE EN 166.
  • Lenses provide 100% UVA/UVB protection and distortion-free optical clarity.
  • A prescription eyewear solution is available for ESS FirePro™ goggles: the ESS U-Rx™ Insert.   This prescription carrier is cross-compatible with ESS Cross-Series and ICE™ Eyeshields, providing an Rx solution that can be used across numerous ESS eye pro platforms.

Kit Includes:

  • 1 Black FirePro-1971 EX-2™ Goggle Frame with Closed-Cell Vent Foam
  • A Two-piece Black Strap with Snap-on/Snap-off Helmet Mounting Brackets (No Drilling Required) and Black Speed-Clip™ Strap Outriggers
  • 1 Clear FirePro-1971 Clear Lens
  • 1 User's Guide
  • 1 ESS Sticker
Click HERE for more info

Ratings & Reviews

No reviews available

Be the first to Write a Review

Q&A's:

"What's the difference between the EX-1 and EX-2 goggles?"

EX-1 model features a two-piece strap with semi-permanent mounting brackets that easily secure to brimmed helmets, no drilling required: This patented system keeps the goggles on hand at all times, and allows them to be stowed on the front or back of a helmet. This configuration is recommended for use without face shields. EX-2 model features a two-piece strap with Snap-on/Snap-off mounting brackets that easily secure to brimmed helmets, no drilling required: This patented system allows the goggles to be kept on the front or back of a helmet, or quickly removed and stowed in a pocket. This configuration is recommended for use with or without face shields.

"Lost one of the holding screws at a fire, can I reorder them?"

You can reorder these. Use part number ESS-740-0251 in the search bar and it will take you to them.

"What's the difference between the EX-1 and EX-2 goggles?"

the way they attach to the helmet