Special discounts may apply for high volume sales.
Contact our Bids & Quotes department for more information.
Eric, we recommend you go by the sizing chart at the bottom of the web page to start with, then we would ask that you do your own measurements, including the following and note that you are sending actual measurements also and that they are for a female, chest, waist, HIPS, inseam, sleeve, then we can send all of that to the manufacturer for them to suggest what needs to be ordered.
XL sleeve 36", waist 40"-42"
2XL sleeve 37", waist 44"-44"
per the vendor the garment is certified NPFA 2012 industrial/ARD FR apparel
inseam reg 30", tall 32"
Fred, Lakeland does't have a weight on this item, a good guess would be around 2 lbs, they are going to weigh different pending on the sizes, the amount of trim will have an effect also.
Fred, just got an update on the weight of coverall you had asked, it is going to be closer to 5 lbs.Got a FF in one of the local FD to get on a scale with the coverall on and then again with out, difference was about 5 lbs.
The inseam length for all sizes is 30". Along with the zipper on the bottom, they come with ankle straps that allow you to adjust the length. You are not able to shorten due to the zipper and reflective tape.
30" but this is not the same as your pant inseam. These are coveralls with a pattern that is designed to be worn over clothing so the crotch is much lower that say a pair of jeans.