Get the Job Done Quickly and Powerfully With Our Exclusive Vent Boss:
Eat through anything with this bad boy. Get rid of that old vent saw that takes 20 pulls to start up. This two-stroke motor is reliable, fast, and tough to get you on and off the roof as fast as possible.
- Adjustable depth gauge
- Simple and easy maintenance
- Chain brake to protect against kickback
- Throttle lockout to prevent accidental operation
- Chain catcher
- Vibration damping system to reduce vibration
- Stop switch
- Muffler to reduce noise levels
TheFireStore and Cutters Edge have collaborated to produce the Exclusive Vent Boss Rescue Saw. The Vent Boss delivers up to 13,300 RPM's of sharp teeth and power – enough to eat through anything. Stop losing critical time and exposing your crew to additional danger with that old vent saw that takes 20 pulls to start up. The Vent Boss is reliable, fast, and tough so you can get on and off the roof as fast as possible.
The heart of the Vent Boss is its Husqvarna73.5cc, 5.7hp, Single-cylinder, 2-cycle engine.
- Maximum Torque: 4.5 Nm @ 8,100 rpm
- Maximum Power Speed: 9,600 rpm
- Maximum Engine Speed: 13,300 rpm
- Idling Speed: 2,700 rpm
- Modular One-Piece Ignition System
- Centrifugal Air Filtration System w/High Volume-Heavy Duty Felt Filter
- Lightweight, High Strength Magnesium Crankcase
- 3-Piece Crankshaft
- Fuel Tank: 23.67 fl. oz.
- Fuel Mix Ratio: 50:1
The large “glove friendly” D-shaped pull handle gives Vent Boss operators an advantage. In addition the Vent Boss has a combined choke/stop control that allows for easier starting and reduces the risk of “flooding” the engine. A compression relief valve also reduces starting resistance for easier starting.
The throttle lockout is designed to prevent accidental operation. When you press the lock it releases the throttle control; when you release the handle both the throttle control and the throttle lockout move back to their original positions. This arrangement means that the throttle control is automatically locked at the idle setting.
With a max-power chain speed of 75.67 fps the dual-raker fire department style carbide-tipped cutting chain gives the Vent Boss all it needs to eat through anything. Easy side access allows for trouble free chain tension adjustment. The inertia activated-chain brake stops chain rotation in less than 1/20th of a second. It is designed to stop the chain if you get any kickback thus reducing the risk of accidents.
Air intake features a centrifugal air cleaning system with a high volume-heavy duty felt filter that protects the engine from smoke, dust and steam. The top radius of the guard plate combined with the top ported muffler and arcuate shaped chain brake handle directs the engine’s pressurized exhaust flow to blow the smoke and heat away from the saw during ventilation cuts.
The Vent Boss is equipped with a vibration damping system designed to reduce vibration and make operation easier.The body of the Vent Boss, including the cutting equipment, is insulated from the handles by vibration damping units. The full-wrap, rubber-coated, anti-vibration mounted handles further reduce the transfer of vibration between the Vent Boss and the operator.
The adjustable Guard/Depth Gauge® with integrated guard plate protects the operator from accidental contact with the chain and allows depth of cut to be set to avoid cutting structural members. The tool-less design allows for fast and easy adjustments or removal even with gloves on.
With the Guard/Depth Gauge® removed and the Vent Boss in a conventional chain saw configuration, the spiked bucking dog can be attached to the saw to stabilize and support the saw. This also increases the operator’s efficiency during felling, clearing or bucking operations.
Learn more by downloading the Operator's manual HERE