The Tempest Single Speed Power Blower provides positive pressure ventilation in a simple, lightweight, economical design.
With little to no switches or controls, it's also one of the simplest units to operate and quickest to set up: Plug it in and go!
||22" x 21" x 24.25"
||24.75" x 21" x 26.25"
||28" x 21" x 30"
||20.5" x 19.75" x 21.75"
GFCI Compatible Single Speed Electric
- Type: Positive Pressure Ventilation Fan - Cone Air Flow
- Drive/Motor: Single Speed Electric
- 16" Models: 1.5 HP TEFC Motor
- 18", 21" & 24" Models: 1 HP TEFC Motor
- GFCI Compatible: Designed to Run on 15 AMP Circuit - Actual Draw Approx. 14 AMP 110V / 60Hz Standard
- Blade: 16", 18", 21" or 24" AirFlex Fiberglass Reinforced Ployamide Blades
- Shroud: Turbo 2000 Design Tapered Aluminum w/ Durable Powder-Coat Finish
- Grille: Continuous Circular Wound, Zinc-Plated Steel w/ 8 Tie Points for Additional Safety, Meets UL & European CE Safety Standards
- Frame: Welded Square Steel Tubing w/ Durable Powder-Coat Finish
- Tilt: Manual Set Foot Operated Dual "Winning Step" Five Position Tilt: +15°, +10°, +5°, 0°, -5°
- 16" Models: 6" Non-Pneumatic w/ Steel Hubs
- 18", 21" and 24" Models: 8" Non-Pneumatic w/ Steel Hubs
- Maximum Cord Length:
- 14 GA. - 60'
- 12 GA. - 95'
- 10 GA. - 150'
- 8 GA. - 240'
- 6 GA. - 380'
The Single Speed's 1.5 and 1.0 HP motors are extremely simple to operate with only a single switch used to turn the unit ON or OFF. All models are GFCI compatible and will run on any 15 amp circuit without tripping the breaker. Every Single Speed positive pressure ventilation fan provides impressive CFM capable of creating positive pressure ventilation.
Welded Roll Cage Frame
Every bend and cross brace weld is structurally engineered to give this PPV fan's frame more strength and durability, improving its strength to weight ratio by as much as 30%. The positive pressure ventilation fan's frame is specifically designed to give protection to nearly all angles and sides of the shroud and motor, and doubles as a handle for lifting/carrying. This "roll cage" design allows for industry leading durability for the everyday challenges that come with fighting fires.
Extra wide 8" off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. "Walking" or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan's blades while kneeling to set brake levers is eliminated. 16" models are only available with 6" non-pneumatic tires.
Turbo 2000 Shroud
By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
AirFlex Composition Impeller
Paired specifically with its equipped 1.5/1.0 HP motor, the SS's uniquely designed impeller "wings" deliver maximum air volume (cfm), velocity and pressure possible. The impeller blades are made from a high strength composite fiberglass reinforced polyamide. Composite blades require less torque from the engine to spin resulting in increased CFM. Composites also provide increased safety, as the blades are designed to disintegrate upon impact with any foreign object. Aluminum or other metal blades may chip or fragment when structural integrity is compromised, throwing potentially dangerous shrapnel in any direction.
The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan's listed dimensions.
Dual "Winning Step"
No levers to set or knobs to tighten when setting the angle for positive pressure ventilation (PPV). Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position.
Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the "Turbo 2000" shroud integrity. Meets strict European CE Safety Standards.
A brand new Power Blower feature is the Information and Safety Bar added to the folding handle. The bar features a large section of durable, reflective material to dramatically increase visibility of the positive pressure ventilation fan from front view and a full list of instructions to allow for safe and effective use.