List: $100.40 |Save: $44.41

Streamlight 3AA ProPolymer HAZ-LO Helmet Lighting Kit



Intrinsically Safe alkaline flashlight and helmet mounting kit

The 3AA Propolymer® HAZ-LO® is an intrinsically safe, high performance, 3 AA Alkaline powered LED flashlight. It features a sealed tail switch for momentary or constant on operation, integrated & retained facecap lock and mechanical battery polarity protection. The body is constructed of an engineering polymer resin that is virtually indestructible, shock resistant, anti static, non-conductive and light weight.
  • 3 meter impact resistance tested.
  • IP67 rated; dust-tight and waterproof to 1 meter for 30 minutes.
  • Anti static and non-conductive.
  • Integrated and retained facecap lock.
  • Corrosion proof.
Case Material:Impact and chemical resistant Engineering Polymer resin; o-ring sealed and vented
Dimensions:Length: 7in. (17.78 cm)
Body Thickness: 1.05 in. (2.67 cm)
Width: 1.5 in. (3.81 cm)
Face Cap Diameter: 1.93 in. (4.9 cm)
Weight:6.6 oz. (187 grams) with batteries (included in purchase)
Lens:Unbreakable polycarbonate lens with scratch resistant coating
Light Source:Seve 5mm ultra-bright white LEDs, impervious to shock with a 100,000 hour lifetime.
Light Output:120 lumens
500 candela
45 meter beam distance
Run Time:Runs 24 hours
ON/OFF:Push-button tail switch. Sealed switch design protects it from corrosion caused by battery leakage 
  • 3 “AA” alkaline batteries reduce battery and recycling costs by 25%
  • Combination of visual and mechanical polarity protection ensures correct installation of batteries
  • Light designed to not power on if batteries are installed incorrectly
  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
  • “Captured locking” set screw will not back out - prevents FOD (Foreign Object Debris)
  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
  • Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
  • IP67 rated; dust-tight, waterproof to 1m for 30 minute
  • 3 meter impact resistance tested
  • Ergonomically designed for maximum hand comfort
Approvals:Meets requirements of NFPA 1971-8.6 (2007)
Meets applicable European Community Directives
Warranty:Streamlight warrants this product to be free of defects for a lifetime of use except for batteries and bulbs, abuse and normal wear. Streamlight will repair, replace or refund the purchase price of this product should we determine it to be defective. This limited lifetime warranty also excludes rechargeable batteries, chargers, switches and electronics which have a 2 year warranty with proof of purchase. THIS IS THE ONLY WARRANTY, EXPESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MECHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARE EXPRESSLY DISCLAIMED EXCEPT WHERE SUCH A LIMITATION IS PROHIBITED BY LAW. You may have other specific legal rights which vary by jurisdiction.

Ratings & Reviews

No reviews available

Be the first to Write a Review


"Can the rubber piece hold 2 or just 1 flashlight??"

It is possible, going to be a tight fit though, good luck

"Can the rubber piece hold 2 or just 1 flashlight??"

I have purchased this item, and it is able to hold 2 flashlights, but i just hold one on one side and door wedges on another

"Does the mounting clip have the capability of rotating up or down to angle the light in the direction needed without having to tilt the helmet?"

Jen, sorry it does not, if you want to look at somthing thats not in front of you your going tohave to move your head/helmet.

"How much does it weight?"

6.6 oz