$179.99 - $209.99
List: $360.36 |Save: $150.37

Streamlight Vulcan 180

$179.99 - $209.99
SKU: W-44300//In Stock

Details

The lightest portable lantern of its kind, the Vulcan 180 is designed to burn brighter and run longer making it an essential firefighting tool.

This rechargeable, waterproof lantern has a 180 degree tilting head which allows you to direct the light where you need it. Three C4 LEDs bring you extreme brightness along with two blue taillight LEDs for visibility in thick smoke.
  • Features a 180° articulating head that aims the beam where you need it
    • Head locks in-place in forward facing position
  • Three C4® LEDs within deep-dish parabolic reflectors produce a tight beam with optimum peripheral illumination
  • Two ultra-bright blue taillight LEDs make certain you can be seen even in thick smoke
    • Can be programmed on or off
  • Light Output:
    • High for a bright, far-reaching beam: 1,200 lumens; 75,000 candela; 548m beam; runs 4.75 hours
    • Low for a less intense beam and longer run time: 350 lumens; 22,000 candela; 296m beam; runs 12 hours
  • Optimized electronics provide regulated intensity
  • Large, multi-function, push-button switch easy to use with gloved hands
  • Rechargeable 8800 mAh Lithium Ion battery. Fully recharges in 9.2 hours
    • Battery status indicator
  • High impact, super-tough nylon construction; rotating head constructed from high grade aluminum encased in super-tough nylon; reinforced D-Rings
  • Rubberized cushioned-grip handle designed for easy hand off
  • IPX7 rated  - waterproof to 1m submersion
  • Flat base area allows light to stand on its own for scene lighting
  • Operating temperature: -20°F to 130°F. (To maintain hazardous locations rating: -20°C to 40°C)
  • Quick install charge rack fits same foot print as LiteBox® and Vulcan® series
  • Available in international safety orange
  • Two models:
    • Standard System with mounting rack, AC/DC charge cords and quick release shoulder strap
    • Vehicle Mount with 12V DC direct wire rack and quick release shoulder strap
  •  7.43 in. (18.8 cm); 2.47 lbs. (1123 grams)
Models:
  • 44300: Yellow, Light only, No Charger, Div 2
  • 44301: Yellow, Standard System, IEC Type A 120V AC/12V DC Charger, Shoulder Strap, Div 2
  • 44302: Yellow, IEC Type C 230V AC/12V DC Charger, Shoulder Strap, Div 2
  • 44305: Yellow, Vehicle Mount System, 12V DC direct wire rack, Shoulder Strap, Div 2
  • 44310: Orange, Light only, No Charger, Div 2
  • 44311: Orange, Standard System, IEC Type A 120V AC/12V DC Charger, Quick Release Shoulder Strap, Div 2
  • 44312: Orange, IEC Type C 230V AC/12V DC Charger, Quick Release Shoulder Strap, Div 2
  • 44315: Orange, Vehicle Mount System, 12V DC direct wire rack, Quick Release Shoulder Strap, Div 2

 

Ratings & Reviews

No reviews available

Be the first to Write a Review

Q&A's:

"Does the new light fit the charging cradles of the current Vulcan or do we need to redo all chargers on rig??"

Hi Smitty, sorry but this unit has it's own charging bracket, so no it's different.

"Can I use the charger from the LED Fire Vulcan with the Vulcan 180 or do I need to purchase one with the 180."

The charger base is different, but the cords are the same. If your charger base is mounted on a truck or in the station the new one will line up exactly as the previous one. New holes will not need to be drilled.

"WHAT'S IT'S WEIGHT?"

2.47lbs.

"Can use this flashlight with old fire vulcan wall charger? Thanks"

The charger base is different, but the cords are the same. If your charger base is mounted on a truck or in the station the new one will line up exactly as the previous one. New holes will not need to be drilled

"Will this Vulcan light charge on the older fire Vulcan LED charger?"

The charger base is different, but the cords are the same. If your charger base is mounted on a truck or in the station the new one will line up exactly as the previous one. New holes will not need to be drilled.

"I currently have one of the older halogen vulcan lights. Will this light fit in the charger of my old light if I buy just the light?"

The charger base is different, but the cords are the same. If your charger base is mounted on a truck or in the station the new one will line up exactly as the previous one. New holes will not need to be drilled.