List: $189.50 |Save: $63.11

Veridian Fire Armor Structural Firefighting Glove, NFPA

SKU: W-GC-FA//Mixed Availability


A true three-dimensional form fitting glove with a curved finger design, inset thumb with enhanced finger dexterity.

The one piece back shell is made from FR and water repellent 100% Kevlar knit fleece 7.5 oz. fabric with exceptional flexibility across back of hand.

A non-restricting Eversoft® leather knuckle band is sewn across back for added knuckle protection. Elastic is sewn into wrist crease for close fitting cuff. Back is lined with a layer of 6 oz. modacrylic non-melting and non-dripping liner.

  • 60+ TPP and class leading conductive heat transfer protection
  • FR water repellent 100% Kevlar® knit fleece t with 1 piece back shell
  • A layered non-restrictive knuckle patch
  • Extra layer of 6 oz. modacrylic liner sewn to the back shell
  • A double backed 3 mil breathable Pyrotect Barricade moisture barrier
  • 100% water proof, viral/chemical penetration resistance and blood borne pathogen protection
  • A layered 6 oz. 65% Kevlar®/35% Nomex® stitch bonded FR liner
  • Five separate curved form-fitting forchettes made from 3.5 oz. to 4.0 oz. grain cow leather for maximum finger dexterity with a 60+ TPP rating
  • Exclusive breathable adhesive for ensuring full liner/barrier glove bonding
  • 1 piece palm 3.5 to 4.0 oz. Eversoft® cow leather tanned with additives to stay soft when wet and low water absorbance with repeated soakings for a 60+ TPP rating
  • 4” Black Nomex cuff with leather pull patch and hang-up loop
  • This glove is proudly made in the USA with highly skilled employees
  • This glove is certified to NFPA NFPA 1971 by the Safety Equipment Institute (SEI)

A double-backed 3 mil Pryotect Barricade moisture barrier is breathable, 100 % waterproof, viral/chemical penetration resistant, and provides blood-borne pathogen protection. Barrier extends full length of glove for complete protection.

The 6 oz. 65% Kevlar® and 35% Nomex® stitch bonded FR liner insulates the inside back of hand.

Five separate finger forchettes have curved and form fitted cut from 3.5 oz. to 4 oz. black Flexor cowhide tanned to meet NFPA flame test for the highest finger dexterity.

Special breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove adhesion meets NFPA requirements for liner retention.

Palm is 1 piece 3.5 to 4.0 oz. Eversoft cow leather tanned to meet NFPA flame resistance test and treated with additives to stay soft when wet with low water absorbance during repeated soakings. Thumb is 2 piece inset into palm to provide unrestricted movements of the thumb right to left.

Glove liner has a 2" grain leather cuff sewn inside glove wrist over top of the liner for the gauntlet model and bond with 1.5" black FR binding to finish cuff.

Wristlet model has a 4” Black Nomex® cuff with leather pull patch and hang up loop.

This glove is sewn completely with 30/3 Kevlar® thread.

This glove is certified to NFPA NFPA 1971 by the Safety Equipment Institute (SEI).

Click here for Size Chart

Note as of 04/18/2018: With the new NFPA sizing requirements the Cadet sizes are no longer available. Gloves that were previously designated as 'cadet' sized with 1/2" shorter fingers than normal will be replaced by 'wide' designated styles.

Ratings & Reviews

8 reviews

One of the best gloves available


Have used these gloves for roughly a year, and could not be happier. Well designed and have proven to be extremely durable. I will put the dexterity at excellent, but not best. It is really unbeaten at keeping the heat off your hands, even when handling hot items, in my case a dryer that was still smoldering. Cut resistance also top notch due to fabric/leather selection. Again the dexterity is EXCELLENT, but if that is your main priority then the superglove is what you want. Overall though when you consider protection, durability, and dexterity this glove should be considered one of the best on the market today.

Protected my hands


I received burns to my arms, neck, ears, face, and top of my head but my hands came through with just one minor blister on my left hand. I will not use any other glove as my main pair!

I would definitely buy these again


These gloves are very comfortable. I haven't used them in a big fire yet but in the small fire I was in, no water got in and soaked my hands. You can maneuver very well in these. I hand full range of motion in my hands in the fire. I would definitely recommend these to other people.

Veridian fire armor gloves


The product looks and feels great. It is fast and easy to put on and take off. It is easy to move in and have fine motor skills but the construction is lacking the lifespan needed to be a reliable glove in the fire service. For the money I thought the glove would have lasted me more than one month. I think it is a good buy for someone who only uses this glove for working fires and trains with another set of gloves.

Best gloves I ever bought


I've had these gloves for around 4 months and I have zero complaints. I've used them in the burn box a couple of times and haven't had any issues with temperature or how they fit. Grips tools and hose fine without slipping.

Dexterity of oven mitts


Tried both normal and cadet sizes, both had poor flexibility and dexterity, stiching too thick at finger tips, prefer the Firecraft Phoenix glove.

Worth It


Fits great and has great dexterity. Keeps the water out, and allows you to easily put them back on without the liner coming out when you take them off. They've been worn in a few fires and lots of training and are holding up well.

Perfect gloves


highly recommend. makes masking up with gloves on easy. still can't seem to text on my iPhone tho. fix it, Dice